Eero - Electrical Engineer Assistant AI Skill

Name: Eero - Electrical Engineer Assistant AI Skill
Brand: KissMySkills
Price: 29.0 USD
Availability: InStock

Electrical Engineer, Eero AI skill by KissMySkills, cover

$29.00

Eero - Electrical Engineer Assistant AI Skill

4.87 · 6,430 reviews across KissMySkills

$29.00 deze skill vs $110+/hr a consulting electrical engineer inhuren

Compleet skill-pakket directe downloadeero-electrical-engineer-assistant.txt

Works with

Choose how to get it

Buy once $29 Keep the file forever. Instant download. All-Access this skill + 1,000 more $8.25/mo billed yearly Loaded into your chat by the connector. Or $19 month to month. Cancel any time.

Secure checkout by Shopify

Ask Eero something hard.

📎 eero-electrical-engineer-assistant.md LOADED ✓

480V three phase, 60 hp motor 200 feet from the MCC, conduit in a 40 degree room. Size the feeder, breaker and overloads.

CLAUDE · AS EERO, ELECTRICAL ENGINEER ASSISTANT You get: three intake questions first, because the brief gave no service fault current, no conductor insulation rating and no start method -> then the full load current taken from NEC Table 430.250 rather than the nameplate, 77 A for a 60 hp 480 V motor -> then conductor sizing at 125 percent, 96.3 A minimum, with the 0.87 ambient correction at 40 degrees on 75 degree terminations applied before the size is chosen -> then voltage drop over 200 feet checked against the three percent target and the conductor upsized where it fails -> then short circuit and ground fault protection at up to 250 percent per Table 430.52, overloads at 115 or 125 percent of nameplate depending on service factor -> then the disconnect, the interrupting rating question you still have to answer, and the reminder that this is a design calculation only and the work itself is qualified person work under NFPA 70E.

⚡ Direct downloaden ∞ Voor altijd van jou ✎ Door ons geschreven

Add it once. Your AI works like a specialist.

Open het in Claude, ChatGPT of Gemini - je AI leest het en wordt specialist in dit vakgebied.

Direct downloaden · 30 dagen niet-goed-geld-teruggarantie. Eén keer betalen, voor altijd houden - geen abonnement. Door ons geschreven en getest, nooit van GitHub geschraapt. Retourbeleid

Vragen voordat je koopt?

Schrijf ons en een mens antwoordt, meestal dezelfde dag. Geen bot, geen ticketwachtrij.

hello@kissmyskills.com

Trademarks of their respective owners. KissMySkills is not affiliated with or endorsed by them.

Jij leest het niet. Jouw AI doet dat.

Geef het bestand één keer aan Claude, ChatGPT of Gemini. Het leest het, wordt specialist op dit gebied en antwoordt vanaf het volgende bericht als Eero.

Eén aankoop. Geen abonnement. Het bestand is van jou om voor altijd te bewaren en opnieuw te gebruiken.

// reviews

What buyers say.

From reviews across KissMySkills

★★★★★ Max T. on Nadia — Email Marketing Specialist

strategy consultant. client deliverables need to meet a high bar. this gets me to a usable first draft in a fraction of the time.

★★★★★ Karolina W. on Diane — Executive Assistant

product manager. used to spend too much time formatting and structuring. this gives me a consistent starting point every time.

// what's inside

What's inside this skill

Runs load calcs, ampacity derating and voltage drop with the NEC or IEC clause cited
Sizes overcurrent devices against real available fault current, not a stock rating
Handles motor circuits as four problems: conductor, starter, protection, disconnect
Frames every job as NFPA 70E work: qualified person, lockout, de energised, verified

Electrical designers, plant and facilities engineers, controls integrators and contractors preparing calculations for a permit or a coordination study.

// wat erin zit

What you're actually buying

The feeder was sized off the nameplate, nobody derated for four current carrying conductors in the same conduit at 40 degrees, and the run is 200 feet. That circuit is legal in a spreadsheet and wrong on site. Installed as an electrical engineer AI, your assistant does the whole chain in order: connected load, demand factors, ampacity with temperature and fill correction, voltage drop, overcurrent device, then the coordination check.

It asks the voltage and configuration, the code basis, the available fault current and the ambient before it sizes anything, because each one moves the conductor. It cites the NEC article or IEC clause rather than asserting a rule, holds branch circuit drop near three percent, checks interrupting rating against real available fault current, and treats motor circuits as four separate sizing problems. Safety is not a footnote: the framing is always NFPA 70E, qualified person, de energised, verified.

Runs in Claude, ChatGPT or Gemini from the same file. Pay once, keep it, install in two minutes.

eero-electrical-engineer-assistant.txt

# Eero, Electrical Engineer Assistant
KissMySkills.com | Install: paste this whole file into Claude Projects (Project instructions), a custom GPT (Instructions), a Gemini Gem, or your AI's system prompt. Then just ask for what you need.

## Who you are
You are a power systems engineer with fourteen years in commercial, industrial and utility interconnection work. You size, protect and coordinate: services, feeders, panels, motors, generators, PV. Safety first in the literal sense. Every answer assumes the work is done de energised by a qualified person, and you put the code article beside the number so the buyer can check you.

## What you know
- Load calculations: connected against demand load, NEC Article 220 demand factors, continuous loads at 125 percent, and the gap between calculated load and recorded demand.
- Conductor ampacity: NEC 310.16 at 60, 75 and 90 degrees, termination ra

Fragment uit het bestand dat je echt downloadt.

// zo installeer je Minder dan 2 minuten

Vier stappen. Elke AI-chat.

01
Download het bestand
Na het afrekenen komt de downloadlink in je inbox terecht. Sla het bestand ergens op je apparaat op.
02
Open je AI-chat
Claude, ChatGPT, Gemini, Grok of Copilot - welke je ook al gebruikt.
03
Plak de inhoud van het bestand
Plaats het in het veld voor de systeemprompt, projectinstructies of aangepaste instructies.
04
Begin met werken
Je AI is nu geconfigureerd als specialist. Stel hem alles wat binnen zijn vakgebied valt.

Geen technische kennis vereist. Geen abonnement. Eenmalig betalen, voor altijd gebruiken.

// compatibel met

Werkt met elke grote AI-chatbot.

Plaats het bestand in de systeemprompt, projectinstructies of aangepaste instructies van je AI. Geen configuratie. Geen code. Geen vendor lock-in.

What buyers say across KissMySkills

This skill has no reviews of its own yet. These are real reviews of other KissMySkills skills, built the same way.

★★★★★
operations lead at a growing startup. we needed consistency across the team. this gave us a shared baseline to work from.

Lukas B. on Nadia — Email Marketing Specialist
★★★★★
dropped Serena - Market Researcher AI Skill into Claude projects and it just works. writes campaign briefs, social post directions, monthly content outlines. the output doesnt need much editing which is the main thing.

Sarah K. on Serena — Market Researcher
★★★★★
cfo at a professional services firm. the output structure matched what our board expects.

Jan Z. on Nadia — Email Marketing Specialist
★★★★★
product designer. needed a structured communication layer for cross-functional work. this provides it.

Ewa A. on Serena — Market Researcher
★★★★★
investment analyst. the analytical structure matches what i need for client-facing documents.

Joanna Y. on Diane — Executive Assistant
★★★★★
hr business partner at a 200-person organisation. the structured outputs made it easier to standardise documentation quality.

Rachel M. on Nadia — Email Marketing Specialist

// faq

Vragen over dit product

What does the electrical engineer AI skill do that a calculator cannot?+

It runs the sequence in the right order and shows the article behind each step. Connected load and demand factors, ampacity with temperature and conduit fill correction, voltage drop, overcurrent device selection, interrupting rating, then coordination. It also tells you which input is missing and why that input changes the size, instead of returning a number built on a silent assumption.

Will it walk me through wiring something myself?+

No, and it is written to refuse. It will not talk anyone through work on energised equipment, opening a panel, testing a live circuit or bypassing a lockout. It gives design calculations, code references and review comments. The physical work is qualified person work under NFPA 70E, done de energised and verified, or by a licensed electrician in your jurisdiction.

Can it replace a coordination or arc flash study?+

No. It has no access to your one line diagram, your utility fault data or your SKM or ETAP model, and it never claims to have run one. It can explain curve overlap, check clearing time margins on numbers you give it and prepare the data collection list. The stamped study and the released drawings still need a licensed electrical engineer.

Which AI tools does this skill work with?+

Works with Claude (recommended), Claude Code, ChatGPT, Gemini and Copilot, and any AI chat that accepts system prompts. Claude Projects gives the best results because it keeps your context between sessions.

Do I have to read it myself?+

No. The file is written for your AI to read, not for you. Upload it or paste it in once and the AI takes on the role. After that you just ask it questions the way you normally would. You're welcome to open it and read it, but nothing here depends on you doing that.

Is this a physical book?+

No, it's digital. You download it the moment the order goes through and it's yours permanently. The cover is styled like a book because each edition is written and edited as one self-contained piece of work. The reading part is your AI's job, not yours.